روند کار ارتباط فیبر نوری
پیام بگذارید
Sending: The CPU serializes parallel data through a dedicated IC chip and inserts corresponding bit codes (start, stop, check bits, etc.) according to the communication format. The signal is sent to the fiber optic connector (i.e. fixed plug) through the output terminal TXD, and then the light source in the fiber optic کانکتور تبدیل الکترو نوری را انجام می دهد.} سیگنال نوری تبدیل شده از طریق پلاگین دینامیکی فیبر نوری به فیبر نوری ارسال می شود و سیگنال نوری به جلو در فیبر نوری. پخش می شود.
Reception: The optical signal from the optical fiber is sent to the receiver of the fixed plug through the movable plug of the optical fiber connector. The receiver performs optical electrical restoration on the received optical signal to obtain the corresponding electrical signal. The electrical signal is sent to the RXD input terminal of the dedicated IC chip, where the serial data is converted into parallel data and then transmitted to the cpu .






